Taylor Scott Collection

The Process

The Process
Ottomans & Headboards
New Releases
Customer Reviews
Other Useful Information
Terms & Conditions
Contact Us



The Frame

We start our process in our own wood shop, using kiln dried northern hardwood. The wood is cut, shaped and sanded by our master craftsmen.We assemble our frames with double dowels, hardwood corner blocks, screws, glue and industrial staples. Each one of our quality frames comes with a lifetime limited warranty.

The Springs

  • Our springs are hand set into the frame.
  • The springs are hand set at 4 inch centers.
  • Springs are hand tied from one spring to another.
  • We only use tempered steel springs.
  • Our spring system also comes with a lifetime warranty.

 The Bench

Using the "old fashioned way" we bench upholster one piece at a time. The frame is placed on a bench where our skilled upholsterers heavily pad the inside and outside of our frames with a cotton batting. Our frame is fully upholstered in 100% 12 oz. Cotton Duck Fabric.

The Slip

All of our fabrics are hot washed before we cut and sew. This process allows your customer to wash their slip in their washer (please see care tag which is attached to all slipcovers). All seams are over locked, which is a tight stitch applied to the edge of every open ended piece of fabric.

If you lift up the front kick panel of the skirt on our slips, you will see four to six pieces of fabric that have been sewn together, sealing every open edge to prevent unraveling while drying. Showing this to your customer is a great sales tool! We use Dupont thread and guarantee our seams with a two year limited warranty.

Bench Made, One At A Time. Proudly In The U.S.A.

1125 East Redondo Blvd., Inglewood, CA 90302
Phone: 310.672.4000 |Fax 310.672.4040|tscollection@earthlink.net

Powered by Register.com